Patents Pending

Most customers consider our dock lights an extension to their yard lighting. After installation, there's no need for their very bright, sometimes annoying above dock lights. They truly create an atmosphere unlike any light above water. Many have made comments that they can't wait for nightfall now. These systems are not only a proven product to attract fish, but offer great entertainment for only a few bucks a month. Our dock lights come standard with an in-line GFI plug and mount to a dock, seawall or pier. Most installations can be done in less than 30 minutes and you won' t even get wet! Typical installations consist of mounting the power module with 2 screws, lower the lamp assembly in the water and plug it in. That's it!

All Are Not Created Equal!

The exposed bulb on the left is the industry standard. On the right is the protective cover from our Patent Pending lamp assembly that gaurds our bulbs from the eliments. We stacked more than 200 pounds of weight to show how durable our product is. We only stopped at 20 weights because the stack was tipping.

------------------------------The difference is clear! The others won't stack up!-------------------------- Remember, you get what you pay for!

If you purchased a competitor's system you were informed the bulb would need to be replaced by their technicians, by sending the unit back for repair, or buying the bulb, bulb assembly and cord. Some bulb replacements exceed $250 for each light, every repair. Our PATENT PENDING dock systems offer the only user replaceable bulb on the market. Finally, no more expensive replacements or lengthy down times. The 175 watt mercury vapor bulb can be purchased at your local department store for around $15. Replacement only takes minutes. Unscrew the bad, re-screw with new. If you have a competitor's product in need of a bulb change, replace it with our light kit and save time, money and minimize your worries! See kit below.

Our products are constructed with UL listed components including cable rated for constant submersion! Other companies use extension cord cable not approved for submersion!

----0-----$399- ---------$749-

Patent Pending Greenlite-175 watt with 12,000 lumen output, or the G2 350 watt space saver 2 light system with 24,000 lumen output!

Each system comes complete with in-line GFI, day/night sensor, weight(s), mounting hardware and owner's manual. Each lamp assembly includes 50' of cable standard. Can be extended to 125'.

Greenlite175 Patent Pending replacement light kit

----------------------------------------------------------------------------$169-

Replace any competitors Non Protected 175 watt mercury vapor bulb (shown at top of page) with our fully protected light kit. The next time your bulb breaks, don't waste your money on expensive, obsolete, non protected, non serviceable bulb and cord replacement. Do it yourself for less, in minutes. Our light kit is fully serviceable. As previously mentioned, the bulb in our kit can be purchased at most hardware stores for about $15. FISHNLIGHT.com thanks all who have converted their systems with our light kit! More than 200 sold and counting!

---- ---------------$499- ---------$899-

Patent Pending Sunlite 400 watt system with 60,000 lumen or the S2 800 watt space saver 2 light system with 120,000 lumen output!

Each system comes complete with in-line GFI, day/night sensor, weight(s), mounting hardware and owner's manual. Each lamp assembly includes 50' of cable standard. Can be extended to 125'.

European Dock light

--

This system has been in testing for more than 6 months and will be available soon! The system will offer all the benefits of it's North American brother with one big exception! This will be the first dock light of it's kind from the US to direct connect to 220-250VAC 50Hz power source! The system is 150 watt rated at 1.5 amps with 16,000 lumen! Single and dual kits offered. Colors will include: Green, Blue and Daylight!

Stand by for pricing!

Do not attempt this with a competitors exposed bulb!

--------------------------------------------------------------------------------------------Before cleaning-----After cleaning

This is just one of the many benefits of owning our products. This customer left the country for a few months and cut power to his dock and lift forgetting about his light. After returning he waited for his light to come on. When it did it was very dim. He called us to troubleshoot the problem. It only took a few minutes to figure out the issue. With 20 - 30 minutes of cleaning, the system was fully functional and still is for more than a year! Attempting to clean a competitors exposed bulb in this condition would certainly break it!