FYI:
When choosing a system, ask the "lumen", not the
"watt" rating. Lumen is the only true measurement
of light.
It's on the package of every light you
buy!
CREATOR
of the fully protected, serviceable underwater dock light
assembly! Home of the
worlds most powerful underwater dock light, 120,000 lumen!
Be
cautious of other companies attempting to build lights to
resemble ours. A cookie jar, 65 watt fluorescent bulb and
a rubber pipe coupler from the local hardware store doesn't
make for a safe or durable product. We have invested 10's
of thousands of dollars and thousands of research hours to
insure you are buying the best product available. If you buy
from them, keep this in mind. Their attempt to infringe
on our pending patents may leave you without service!
DL175
Metal Halide system 1200watts (incandescent compared):
DL175
Metal Halide system 2400watts (incandescent compared):
Patent Pending DL175 Metal halide system with 16,000 lumen
output, or the D2 350 space saver 2 light system with 32,000
lumen output! Approximately $6 a month operating cost per
light! 3 available colors, white, green and blue.
DL250
Metal Halide System:
New for 2011! Patent Pending
DL250 Metal halide system with 24,000 lumen output, or the
D2-250 space saver 2 light system with 48,000 lumen output!
Approximately $8 a month operating cost per light! 3 available
colors, white, green and blue.
DL400
Metal Halide System:
New for 2011! Patent Pending
DL400 Metal halide system with 36,000 lumen output, or the
D2-400 space saver 2 light system with 72,000 lumen output!
Approximately $10 a month operating cost per light! 3 available
colors, white, green and blue.
Sunlite400
system 4000watt (incandescent
compared):
S2 system 8000watt (incandescent
compared):
Patent Pending Sunlite400 with 60,000 lumen output, or the
S2 space saver 2 light system with 120,000 lumen output! Approximately
$10 a month operating cost per light! Color, golden yellow.
DL1,
DL2, DLX series dock light:
New for 2011! These systems
allow the user to start small and add lights as needed. Select
the DL1 for one lamp with the option to add 1 more lamp, or
the DL2 for two lamps if you have no further intention of
expanding beyond 2 lamps. Select the DLX to custom build your
system from 2 lamps up to 6 lamps on one control box. Additional
lamps can be added at any time. Each lamp assembly comes standard
with 25' of cable, but is extendable to meet your needs at
10' increments selectable at checkout. Each lamp draws only
0.3 amps of power at nearly 2000 lumen per lamp making this
the most efficient system we manufacture. Each system comes
with a control box and day/night sensor for automatic operation,
hardware, installation manual and a weight for each lamp purchased.
Installation takes only a few minutes and only requires a
120 volt ground fault circuit interupter (GFCI) outlet. If
you do not have a GFCI outlet, select the GFCI plug option
at checkout. The lamps can be installed above or below the
waterline without overheating concerns. 3 available colors,
white, green and blue.
LV
series dock light:
The first and only low power (12VDC) high output plug
and play dock light available for the worldwide market! This
system accepts 100-250VAC 60/50 Hz! The system produces 2000
lumen at just 0.5 amps! Add a second lamp assembly to the
same supply and double the output! The day/night sensor provides
automatic operation. No need for additional timers! You could
expect operating cost to run about $2 per month! 3 available
colors, white, green and blue.
Each
system comes complete with day/night sensor, weight(s)(if
purchased), mounting hardware and owner's manual. Each lamp
assembly includes 40' of cable standard. Can be extended to
150' each lamp. Dock light photos display optional GFI. Select
this option at checkout if your dock is not equipped with
a functioning GFI.
Buy
now 
|
20"
Optional Mounting Bracket
|
Installation

|
This
bracket is optional and not required for standard installation.
Works with DL, Sunlite, LV series lights and Mercury vapor
kit. Available on purchase page menu.
175
watt Mercury vapor kit:
If you purchased a competitor's system you were informed the
bulb would need to be replaced by their technicians, by sending
the unit back for repair, or buying the bulb, bulb assembly
and cord. Some bulb replacements exceed $250 for each light,
every repair. Finally, with our kit there are no more expensive
replacements or lengthy down times. The 175 watt mercury vapor
bulb can be purchased at your local department store for around
$15. Replacement only takes minutes. Unscrew the bad, re-screw
with new. If you have a competitor's product in need of a
bulb change, replace it with our light kit and save time,
money and minimize your worries! It just makes sense! Replace
any competitors Non Protected 175 watt mercury vapor bulb
with our fully protected light kit. The next time your bulb
breaks, don't waste your money on expensive, obsolete, non
protected, non serviceable bulb and cord replacement. Do it
yourself for less, in minutes. FISHNLIGHT.com thanks all who
have converted their systems with our light kit! More than
400 sold and counting! Kit comes with a 40' cable. Extendable
up to 150' upon request.